Services
Foundation repair services in Dallas–Fort Worth
Eleven distinct services, separated because they solve different problems and are priced on different units. 10 of them have cost ranges we could trace to a published North Texas source; where no Texas figure exists, the page says so instead of borrowing a national average.
| Service | Published cost range | Verified companies |
|---|---|---|
| Slab foundation repair | $3,500–$15,000 per job | 42 |
| Pier and beam foundation repair | $3,000–$20,000 per job | 46 |
| Foundation leveling / house leveling | $1,500–$10,000 per job | 34 |
| Concrete pier installation | $300–$1,200 per pier | 28 |
| Steel pier / push pier installation | $1,000–$2,000 per pier | 30 |
| Helical pier installation | $1,200–$2,200 per pier | 10 |
| Drainage correction and French drains | $1,500–$8,000 per job | 47 |
| Root barrier installation | $1,000–$4,000 per job | 12 |
| Crawl space repair | $2,500–$15,000 per job | 18 |
| Basement waterproofing | No Texas pricing published | 6 |
| Foundation inspection / engineer reports | $350–$1,200 per inspection | 47 |
Every service
Slab foundation repair42 verified companies · $3,500–$15,000 per jobPier and beam foundation repair46 verified companies · $3,000–$20,000 per jobFoundation leveling / house leveling34 verified companies · $1,500–$10,000 per jobConcrete pier installation28 verified companies · $300–$1,200 per pierSteel pier / push pier installation30 verified companies · $1,000–$2,000 per pierHelical pier installation10 verified companies · $1,200–$2,200 per pierDrainage correction and French drains47 verified companies · $1,500–$8,000 per jobRoot barrier installation12 verified companies · $1,000–$4,000 per jobCrawl space repair18 verified companies · $2,500–$15,000 per jobBasement waterproofing6 verified companies · No Texas pricing publishedFoundation inspection / engineer reports47 verified companies · $350–$1,200 per inspection
Cost ranges here are what contractors and regional guides publish, not quotes. The cost calculator works from the same figures and shows which inputs drive the estimate. Method choice should follow an engineer’s elevation survey — see inspections and engineer reports.